One , puts up piece fixs
Shall be notify the spare parts 1 and spare parts 2 use screws like the picture and the spring , bed down the livestock and nut link , the spring lightly compresses , the spare parts 1 be able to turn moreover with 2 , between perpendicular through two upright tubes in the heat sink by the spare parts 1 ( masters second and the third on both sides for heat sink ) going into overtakeing the circular tube , circling the spare parts 1 and 2 to be in the horizontal position , 1 two arcs on the spare parts check two circular tubes of residing heat sink interior , screws that the taut screw soliditys to be living stably on the heat sink that the below site is different 1/3 ( upper one fix admittedly piece hour , admittedly fiing 1/3 of heat sink middle part upper site )
Two , fix an installation admittedly
On the basis of builds the piping altitude , the distance at heat sink heart against the identity , the use is develop the screwdriver and is mark out the place to fix the spare parts 3 admittedly , on the basis of away from 3 two dimensionss on the wall size select spare parts one kind , soliditys the spare parts 3 separately being living on the wall stably
Three , the heat sink is fixed
Puting up to be living to fix admittedly on the spare parts 3 heat sink , and pieces 3 is not conform to in case 1 and 2 old and young on the spare parts are high together with fix admittedly , and may loosens the joints of 1 and 2 on the spare parts , and shifts up and down string piece together with fiing admittedly piece highly tallying with , and screws that the taut screw fixs admittedly , one another take into custody in two troughs on the spare parts 2 and spare parts 3 , and may loosen the joints of 1 and 2 on the spare parts in case not coincideing , and cause 2 lefts and right sides on the spare parts suitably remove the content demand , and put up old and young's orientation and master the orientation all may making things convenient for to remove